DT250H / CHARACTERISTICS
Material
ZA Galvanized Sheet, long service life against corrosion
Surface
Anti-corrosion coating, polymerized epoxy-polyester electrostatic powder coating
Color
RAL 7035 Ragged
Busvar Brackets
IEC 60695-2-11: 960° 30s / 30s all plastic parts are resistant to heat rises and fire caused by electrical effects, as specified in bearings for live metal surfaces.
Electrical Characteristics of the Panel
In accordance with IEC 61439-1/2.
Seismic Qualification
IEC 60068-3-3:1993 (1st Degree Earthquake Zone)
IEC 60980 (Nuclear)
EDF, BTR 91 C112 EPRUK (Nuclear)
Nominal isolation voltage for the main bus at the back of the panel:
1000V
Nominal current Ie (35°C):
250A
Peak value of withstand current Ipk:
75,6kA
Peak value of short-term withstand current Icw:
36kA rms/1sn
Frequency:
50/60 Hz
DT250H / FUNCTIONAL SYSTEM
  • Versatile developed for demanding work environments functional electrical distribution board. Mounting on the scaffolding (uprights + plinth) on the wall, on the floor (with plinth) or on the wall.
  • IP 55, 65, 66
  • IK 10
  • Welded structure
  • 7 different height options from  500 to 1700 mm,
    ❑ 500 ❑ 600 ❑ 800 ❑ 1000 ❑ 1100 ❑ 1200 ❑ 1400
  • Width: 400-600-700-800 mm
  • Depth: 150-200-250-300 mm
  • Flat door